D’Gel Cable Gel Solvent – 1 Gallon Jug

D’Gel Cable Gel Solvent – 1 Gallon Jug

PRODUCT DESCRIPTION

• Removes cable gels, blocking compounds, flooding and filling compounds, grease, tar, and oil
• Removes petroleum, polyethylene, and silicone based gels
• Preferred by telecom workers
• Flash point above 140°F (60°C)
• Safe on cable insulation and components, metals and most plastics
• Rinses off with water

D’Gel cable and tool cleaner is a full strength solvent specifically developed for removing cable gels, blocking compounds, Icky Pic, and C-cement. It is also used in removing grease, tar, oil , wax, resin and gum from copper and fiber optic cable. D’ Gel does not contain TCE, HCFC’s or methylene chloride.

Application: Wipe D’Gel® to the cable using a saturated cloth, towel or brush. Wipe from the cable jacket towards the conductor. Fold or rotate the towel to expose a clean surface area before each successive wipe. Finally, allow the D’Gel® solvent to evaporate (air dry) or wipe dry with a lint free cloth.

Cleaning the exposed cable by soaking may be desirable. Pour D’Gel® into a secondary metal or chemical resistant plastic container. Submerge area of cable to be cleaned. Remove cable from container and air dry or wipe off any remaining residue. Then dry with lint-free cloth. Repeat process with clean D’Gel® fro each cable being cleaned. Dispose of used D’Gel® according to local, state, and federal guidelines.